Concept/Product design /Art Sketch of wind device

  • Estado: Closed
  • Premio: €500
  • Propuestas recibidas: 60
  • Ganador: Ilmarcolino

Resumen del concurso

*UPDATE 11.12*
*After request i made the constest #sealed*


*UPDATE 30.11*
*If a fan is used, it should not be seen*
*The design should be futuristic and revolutionary*

Hello to all,
I am looking for a design for one of our products. The design can be conceptual and creative. It can be a hand sketch or a 3D sketch.
It is about a device that generates wind, more precisely a breeze. Both warming and cooling.
The design should be based on the feeling that a gentle summer breeze or a fresh natural wind evokes in you. On the design level, I have further compiled the following guiding ideas:
- It dont needs an owner, ist purose is unquestionable
- Limited but not determited
- The product is multifunctional (Also as design object)
- The product is inspiring
- The product is clear
- The product arouses interest
- The product is discreet
- The product is intended
- Wind only visible through moving objects
There are also the following technical requirements::
- Product is portable
- Product is battery powered
- Product fits on desk

I am very much looking forward to your designs

Habilidades recomendadas

Comentarios del empleador

“Very good design. Good communication. I am so happy, that he participated in my contest”

Imagen del perfil Na55im, Germany.

Tablero de aclaración pública

  • Cobot
    Cobot
    • 2 años atrás

    Please check #96 #97 #98 #99 #106 #107

    • 2 años atrás
  • Veetovt
    Veetovt
    • 2 años atrás

    I was a little late due to illness. Can I submit my work somewhere?

    • 2 años atrás
  • AlonsoSuarez
    AlonsoSuarez
    • 2 años atrás

    #extended

    • 2 años atrás
  • Cobot
    Cobot
    • 2 años atrás

    Please check #96 #97 #98 #99 #106 #107

    • 2 años atrás
  • Ilmarcolino
    Ilmarcolino
    • 2 años atrás

    Hi kindly check #113

    • 2 años atrás
  • mj80825polo
    mj80825polo
    • 2 años atrás

    #extended

    • 2 años atrás
  • pra009anu
    pra009anu
    • 2 años atrás

    Hi there kindly review #103

    • 2 años atrás
  • Cobot
    Cobot
    • 2 años atrás

    check #96 please

    • 2 años atrás
  • wowart1982
    wowart1982
    • 2 años atrás

    check entry #90 please

    • 2 años atrás
  • pra009anu
    pra009anu
    • 2 años atrás

    hi there kindly review entry #85

    • 2 años atrás
  • nikhilboy908
    nikhilboy908
    • 2 años atrás

    Please check and leave feedback for #72 #74

    • 2 años atrás
  • wowart1982
    wowart1982
    • 2 años atrás

    Hello Please check and leave feedback for #67 #68 #69

    • 2 años atrás
  • Cobot
    Cobot
    • 2 años atrás

    Please check and leave feedback for #59

    • 2 años atrás
  • wowart1982
    wowart1982
    • 2 años atrás

    check entry #56 please

    • 2 años atrás
  • russmof
    russmof
    • 2 años atrás

    cek entri #53

    • 2 años atrás
  • russmof
    russmof
    • 2 años atrás

    can you provide an example of a picture/photo of a product you like?

    • 2 años atrás
  • russmof
    russmof
    • 2 años atrás

    check entry #45

    • 2 años atrás
  • russmof
    russmof
    • 2 años atrás

    very interesting job
    if i may know what material do you want for this.
    is he metallic?
    Plastic?
    I'm working on your project.

    • 2 años atrás
  • russmof
    russmof
    • 2 años atrás

    please seal this contest

    • 2 años atrás
  • toshi0001
    toshi0001
    • 2 años atrás

    Is the "battery powered" absolute requirement? (Even a flashlight with D size batteries can retain its functionality only 20 or 30 hours at best. I recommend AC powered (or both AC/DC adaptor and battery if really needed) for a certain kind of warm air heater.)

    • 2 años atrás
    1. Na55im
      Organizador del concurso
      • 2 años atrás

      Hello toshi, you are right. The main orientation is battery operation. Charging can be done via an AC source.
      By the way, I am an electronics engineer and have a little experience with batteries and voltage converters and DC air conditioners ;)

      • 2 años atrás
    2. toshi0001
      toshi0001
      • 2 años atrás

      Thank you. I understand.

      • 2 años atrás
  • wowart1982
    wowart1982
    • 2 años atrás

    Tell me size please , and what is your aim or benifits from this device ?

    • 2 años atrás
    1. Na55im
      Organizador del concurso
      • 2 años atrás

      Salam ya Amr,
      high can be max. 60cm
      Width can be negotiated, but it should be portable.
      Prefered dimensions would be something like h=30cm, max w= 20cm.
      Aim is to have a device that can bring you a nessma to your home whenever you want. While working or sitting on sofa or eating in restaurant....
      Good luck!

      • 2 años atrás
    2. wowart1982
      wowart1982
      • 2 años atrás

      Alikom salam , Thank you dear CONTEST HOLDER

      • 2 años atrás
  • feresht
    feresht
    • 2 años atrás

    I'm working . please don't close before due time . thanks

    • 2 años atrás
  • Lilwhitefurball
    Lilwhitefurball
    • 2 años atrás

    "If" a fan is used" do you mean that the product can produce air even without one? Or atleast a big and visible one? Please answer since it's a crucial detail. If yes I'll be then focusing to it's outer design and the technicalities on where the air can come from. It's really better if we know how the product is going to produce air but for now I'll just think it works the same way as dyson hot+cool blade less fan.

    • 2 años atrás
    1. Na55im
      Organizador del concurso
      • 2 años atrás

      We are still not sure about this and on research.
      Maybe it will be just a pulse of air, then we need to build pressure again in some tank. Maybe we will do it with some other new way. Thats why it said " if a fan is used".
      You can go the way you suggest. Outer design focus and where the air can enter in the mechanisms to go outside to the user

      • 2 años atrás
    2. Lilwhitefurball
      Lilwhitefurball
      • 2 años atrás

      Ok noted

      • 2 años atrás
  • minhajul2888
    minhajul2888
    • 2 años atrás

    work running

    • 2 años atrás
  • Lilwhitefurball
    Lilwhitefurball
    • 2 años atrás

    Hello i already thought of an idea but to be clear is it gonna be like a fan or use a propeller?

    • 2 años atrás
    1. Na55im
      Organizador del concurso
      • 2 años atrás

      Hello, no the fan should not be visible. There should be a mechanism inside that cannot be seen

      • 2 años atrás
  • pra009anu
    pra009anu
    • 2 años atrás

    Wind only visible through moving objects ---could you please clarify this.

    • 2 años atrás
    1. Na55im
      Organizador del concurso
      • 2 años atrás

      wind can not be seen directly right? Only if objects are beeing moved. This is just one property of wind, that should be considered by designing the device

      • 2 años atrás

Mostrar más comentarios

Cómo comenzar con los concursos

  • Publica tu concurso

    Publica tu concurso Fácil y rápido

  • Recibe montones de propuestas

    Consigue toneladas de propuestas De todo el mundo

  • Elige la mejor propuesta

    Elige la mejor propuesta ¡Descarga fácilmente los archivos!

Publica un concurso ahora o únete a nosotros hoy