Find Jobs
Hire Freelancers

Altered Facility/ Lease Improvement Plans

$30-250 USD

Cerrado
Publicado hace casi 5 años

$30-250 USD

Pagado a la entrega
This is a job to draw plans for a existing retail space to become a bake shop/ cafe. Plans will need to have a 3 compartment sink, utility/ mop sink, and 2 hand washing stations installed. We already have the plans made we just need them drawn to submit application for permits. Plans will need to appropriately display the building specs for inspectors. Please list relevant electrical and plumbing information; as business is required to list commercial equipment use on the buildings electrical system, and provide a water safety plan. We can provide a digital sketch of the existing space if necessary. we do have a way we would prefer the kitchen to be set up. Please be a Ohio certified and licensed architect (must provide proof). Dishwashing sinks: A 3-compartment sink designated for dishwashing is required in any operation that sells or serves unpackaged food. The sink should have curved interior edges and at least three (3) compartments for washing, rinsing and sanitizing. The sink should also have two (2) drainboards, one for collection of dirty dishes and the other for air drying. See the example on page 13. Dishwashers are optional, but a 3-compartment sink is required in a facility that sells or serves unpackaged food. Each compartment of the sink must be large enough to submerge the largest piece of equipment you have (i.e. a small bar sink would not be acceptable for washing large pots and pans). HELPFUL TIP: Columbus Public Health requires dishwashing sinks and dish tables to be installed at least 4 inches off of the wall with brackets. Utility sink: Also called a mop sink or service sink, all facilities are required to have a sink designated for cleaning of mops and cleaning tools, and for disposal of mop water. The utility sink must include a faucet and drain. This sink should have hooks or other means to allow mops to air dry. HELPFUL TIP: A curbed sink provides an easier means to dump mop water, and is a good storage spot for the mop bucket when not in use. Utility sink: Also called a mop sink or service sink, all facilities are required to have a sink designated for cleaning of mops and cleaning tools, and for disposal of mop water. The utility sink must include a faucet and drain. This sink should have hooks or other means to allow mops to air dry. HELPFUL TIP: A curbed sink provides an easier means to dump mop water, and is a good storage spot for the mop bucket when not in use. Hand washing sinks: All facilities are required to have adequate employee hand washing sinks, conveniently located in each food and dishwashing area, and equipped with soap and disposable towels or hand dryers. Convenient location indicates that the sink is accessible and visible from any food area, including bars and ice dispensing locations such as wait stations. These sinks are required to have signs reminding employees to wash hands. Exception: In facilities that serve only prepackaged foods, a hand sink is only required in a restroom. HELPFUL TIP: Each sink described in this section can only be used for its designated purpose (hand washing, dishwashing, food prep, mop sink). Ventilation hoods: (NOT SURE WE NEED) A ventilation hood is required at a grill line, or where other cooking equipment and high temperature dish machines are located, to prevent the accumulation of grease, heat, condensation, smoke and vapors. Installation of a ventilation hood requires a permit and inspections. Contact Building Services (phone numbers on page 2) with questions about ventilation requirements or permits for installation. HELPFUL TIP: Ventilation is always required for gas equipment.
ID del proyecto: 19981199

Información sobre el proyecto

7 propuestas
Proyecto remoto
Activo hace 5 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
7 freelancers están ofertando un promedio de $217 USD por este trabajo
Avatar del usuario
Hello We have reviewed your bake shop/cafe design project brief and are interested in working with you. Please contacting us so we can discuss this project in more details. We have over 15 years of experience in this arena and many testimonials from satisfied clients. We guarantee 100% dedication to your project. Take a look at our past work on our portfolio: https://www.freelancer.com/u/dreams3ds We look forward to working with you! Sincerely ARCHVISION3D
$350 USD en 5 días
5,0 (362 comentarios)
9,3
9,3
Avatar del usuario
Hi, I am an Architect (From 2012-present) I have experience in design, modeling, rendering, animation architecture buildings, houses, shops...etc I have skill in 3Dsmax, Sketchup, Lumion 3D, Revit, Auto Cad... I always try by all my best to do everything you want, pls see my portfolio, PM ME FOR MORE DETAIL A lot of projects are done with the best quality Hope to work for you ... Best Regards Nam Architect
$250 USD en 7 días
4,7 (166 comentarios)
6,8
6,8
Avatar del usuario
Good Day ! I am an Architect by Profession. I have a 15 years of experience in Design and Construction Industry. I am excellent in AutoCAD Software and Space Planning that is my strongest skills to help you out accomplishing your Project. I can help you to finish this work and deliver this in a minimum timeframe. Hope to hear from you regarding my proposal so we can collaborate with each as soon as possible. Gospeed! arkitek FRIDAY
$250 USD en 3 días
4,8 (46 comentarios)
5,6
5,6
Avatar del usuario
hello. I am Ronald Ayco, 6 years of experienced as a professional licensed Civil Engineer. I am willing to impart my knowledge and skill in your project. I am currently working here in Philippines, Governtment agency, Engineering Department in the field of planning and designing Buildings and water system. Thank you!
$222 USD en 3 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I was looking for similar kind of work . I would be greatful if you gave chance to work with you. I knew you will not regret working with me .
$277 USD en 7 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de UNITED STATES
United States
0,0
0
Forma de pago verificada
Miembro desde ene 27, 2017

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.