Find Jobs
Hire Freelancers

Design of simple timer with led light and reset button and deliver working prototype.

$250-750 USD

Terminado
Publicado hace más de 5 años

$250-750 USD

Pagado a la entrega
Please review the attached document if you are interested. I am looking to have designed and built a working prototype and CAD drawings that I can provide to a manufacture to build. I am looking for a timer that can turn on a red diode light after 30.60/90 days and make the light blink. It would be a simple design to use a standard watch battery such as the CR 2032 3V. Thank you for considering this project.
ID del proyecto: 18128939

Información sobre el proyecto

17 propuestas
Proyecto remoto
Activo hace 5 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
Adjudicado a:
Avatar del usuario
I like this one more than the previous. It is much more well defined and i can see the time you invested to clear out all the details. I appreciate the efforts If the requirements are still there let's see if we can work out something.
$500 USD en 20 días
4,9 (43 comentarios)
6,0
6,0
17 freelancers están ofertando un promedio de $624 USD por este trabajo
Avatar del usuario
Hi there , i have read all the requirements and i can fulfill of these professionally and i have updated my bid accordingly Regards
$1.666 USD en 3 días
4,9 (31 comentarios)
6,4
6,4
Avatar del usuario
Hello sir, I have experience in designing electronics circuits and can make your project. i will make your project completely on my side and will deliver a working prototype. I can also develop hardware compatible android and windows based apps. I can show you my previous experience on similar projects. If you wish we can discuss in chat. Thanks
$600 USD en 20 días
4,9 (33 comentarios)
6,2
6,2
Avatar del usuario
Fist part bid is for design in $299 It will be followed by an IInd offer of $300 for fabrication. I am a professional engineer with 40 years of experience
$310 USD en 15 días
4,4 (89 comentarios)
6,3
6,3
Avatar del usuario
hi i can do it perfectly
$777 USD en 7 días
5,0 (4 comentarios)
4,7
4,7
Avatar del usuario
Hi there, as your project seems very interesting and attractive to me so I am bidding on your project. Having 5 years of experience in CAD and I am willing to show my skills and provide you better quality work. DO contact me for further discussion and to do some work over it. Thank you.
$250 USD en 5 días
4,9 (32 comentarios)
5,0
5,0
Avatar del usuario
Hi, I am an Aerospace engineer, I have design several PCBs and have a long experience in timer circuit design as I have worked on similar project before I could start working on your project immediately **My skill set includes: -3D modelling (Product design-Advanced surface modeling-Mechanical design, etc..) [Using SOLIDWORKs] {4 years of experience} -3D rendering [Using 360 Photo viewer] {2 years of experience} -Experience with manufacturing techniques and software including (Laser cutters- CNC routers- 3D printers, Composite material, etc…) and the CAM software (Aspire, LaserCAD, Cube Pro) {3 years of experience} -FEA (Structural analysis) & CFD (fluid dynamics analysis) [Using ANSYS program] {3 years of experience} -Excellent English and communication. **Previous work Cars/Ground Robots/Drones/Quadcopters/Toys/Car Accessories/Stress analysis/fluid dynamics analysis VOF and much more you can find in my Portfolio ^_^ **Once you hire me I can guarantee: -Honesty and high quality of work. -Accurate deadlines and clear project planning. -Verified results after counseling of team of professional engineers and professors.
$500 USD en 21 días
4,9 (3 comentarios)
2,7
2,7
Avatar del usuario
Please provide me the requirement and I will do it for you . Long term support is assured
$500 USD en 10 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
dear sir/mam I gone through the attachment. What is understood is that you are expecting a low cost and low low power solution for your product. My suggestion is to use attiny 10 as the controller which cost you around .25cents and the led's and button would cost you around .35cents or less than that depending on your local vendor for mass production. And the cob cost will be so less because you expected for the size of 1dollar coin which 1 inch in diameter . For that size you can get 0.5 cents per PCB . by seeing above all the total cost for that electronics will come around 1.2 dollar approx. the tricker part is that writing code for the controller without RTC(real time clock ). But don't worry I have already worked on this same controller with similar working, to turn on a motor for 5 second on every 12 hours . In here I need to do it for 30,60 and 90 days. the time it takes to finish the project is depend on the shipping time of the components ,pcb and shipping to you. I hope you get my solution. kindly message me for further calrification. regards Abiraman.S
$555 USD en 30 días
0,0 (1 comentario)
0,0
0,0
Avatar del usuario
Necesito más información de este proyecto
$555 USD en 10 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hi, I have a 5 plus years experience in developing several products. Two of them have been sent to USPTO by the owner. One is an a very interesting Mechanical product. I design on Autodesk Inventor, and have things prototyped from contacts in China. Their lead times are very good, I receive prototypes within a week until when I usually have designed a next design for second iteration. 3d printing, assembling, springs, carving, electronics and pcb design etc is all done by myself. I'm an electronics engineer by education, and adequate at coding. I've worked on making robotic arms, 3d printers, home automation systems, and numerous smaller projects and have a few very interesting designs of my own also, ready for collaboration.
$555 USD en 90 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I m 18+ years in PCB Design-Developments & analysis of Electronic circuits , Circuit testing, Quality Check, Fault finding and resolving in circuit and PCB, Optimizing circuits, proper Selection & Analyzing components for various applications as per parameters, Performance test of products, Worked on various Sensors, Voltage regulators, Motors, Micro-controller, Switching circuit, Motor drivers, Wireless modules, Communication protocols, etc. I will always be to meet your requirements.
$833 USD en 10 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de UNITED STATES
Peachtree Corner, United States
5,0
2
Forma de pago verificada
Miembro desde jun 19, 2018

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.