I need an electrical engineer

Cerrado Publicado hace 3 años Pagado a la entrega
Cerrado Pagado a la entrega

Hello,

I am designing a detector to count the passing of spokes on small wheels.

My plan is to use a light source like an LED and a receiver like a photo-diode to create a sort of break beam setup.

The signal will be sent through an amplifier with filtering, to the mic input of a PC to be used for measuring the passes per hour of the spoke of the wheel.

I am having a hard time finding the right product combination and circuit to make this happen.

The wheels are suspended so the spoke casts a shadow on the collector to trigger the signal as the wheel rotates / oscillates. The wheels range in sizes from 8mm to 20mm and have spokes from 1mm to 2.5mm wide.

This should be a very simple device to build and I have made some but it is hard to get both a signal that has enough gain and low noise with the sensitivity to accurately trigger. The make pulse would be around 30k per hour so the wheel is not moving very fast.

Ingeniería eléctrica Electrónica

Nº del proyecto: #29680240

Sobre el proyecto

13 propuestas Proyecto remoto Activo hace 2 años

13 freelancers están ofertando un promedio de $160 por este trabajo

doggar302

Hi! I am an Electronic engineer, PCB Layout, Circuit Design, microcontroller, STM32 microcontroller, C programming expert having past experiences with ,Altium, arduino, pic, AVR, chipkit and Texas instruments microcont Más

$250 USD en 7 días
(18 comentarios)
5.4
umg536

Hi there, I'm bidding on your project "I need an electrical engineer" Being a professional electrical engineer, I can do this project for you. please leave a message on my chat so we can discuss the budget and deadlin Más

$250 USD en 4 días
(7 comentarios)
5.5
anhvinhdongnai

hi i'm vinh I am very good at this. I will give you simple and stable efficient solutions to achieve the wheel rotation count. thank you

$250 USD en 7 días
(13 comentarios)
4.2
epslnl

First, you need to do a little optical engineering with some high school trigonometry. You want to use an IR LED with a narrow beam angle so that the light does not spread out to far before it reaches a wheel spoke. Más

$80 USD en 3 días
(13 comentarios)
4.4
danish2051

Hi I am an expert with more then 6years of experience in IoT, Automation, Embedded Systems, pcb design and dovelopment and prototyping. I have hands-on experience in arduino,esp32, pic, arm, raspberry pi and other mcu. Más

$278 USD en 30 días
(17 comentarios)
4.4
safiullahhuss

Hi, If your wheel is thin enough and can have something mounted on the side, you can use a regular incremental encoder (Avago) and be done in no time. the ecoder will have tight tolerances for the beam so anything tha Más

$111 USD en 20 días
(4 comentarios)
3.0
shobiuet8888

Greetings! We are a corps of (Ph.D., MS) engineers, and have been working on Electrical Projects on international, and local marketplaces. So, beware of middlemen. We have full mastery of modern Electrical fields inclu Más

$140 USD en 7 días
(7 comentarios)
2.7
pranjalKumar8936

Greetings, I am a EEE engineer, experienced in PCB layout, circuit design and micro controller coding. There's already a very cheap optical rotary encoder for doing this thing. Will get you a working prototype if requi Más

$56 USD en 5 días
(2 comentarios)
0.8
harvinder15291

Hi I am a goal oriented person and qualified for the profession of need an electrical engineer Thanks and Regards Harvinder

$90 USD en 1 día
(0 comentarios)
0.0
testman1998

Hello ! The problem is not only electrical. You need microcontroller and software to make filter and to put logic. Then this microcontroller will be connected to the PC software to count pcs per day. If you want, plea Más

$250 USD en 30 días
(0 comentarios)
0.0
amitlko57

I am a good electrial and electronics qualified engineer . I want to work for your project and and work with you in the project to help you .

$140 USD en 7 días
(0 comentarios)
0.0
ehsankhan125

i can help to build your program using Arduino and ultrasonic sensor/photo divid using labview software.. please reply for further discussion

$140 USD en 7 días
(0 comentarios)
0.0