Automatic Sanitizer Dispenser Circuit using Micro-controller

Cerrado Publicado hace 3 años Pagado a la entrega
Cerrado Pagado a la entrega

We want a Sensor based Controller Card for Automated Sanitizer Dispenser Machine, Card should be robust and economic too, We need Pump to start when Hands detected and dispense the Sanitizer, if Hands are in Sensor proximity range for longer time then Dispensing will cut-off automatically at preset duration which should be adjustable between 200ms to 15 Seconds using a potentiometer or preset, The sensing distance has to be adjustable through Pre-set, if the person need more Sanitizer to be dispensed from the Pump then he has to remove hand and represent again within the Sensor range, we want to integrate 3 different types of Sensors (HC-SR04 Ultrasonic Sensor Module, IR LED RxTx Pair, TSOP1838 Photo Sensor) with this controller Card, All sensors option should be available, we will choose different sensor depending upon different requirement or models of Machines but the Card will remain same for all the Sensors, Number of Indications are required (i.e. Power On LED or Standby LED, Detection LED, Cut-Off LED, RGB LED when Dispensing), some other important features to be developed (i.e. Over Load protection and Indication, Reverse Polarity protection, Short Circuit protection) We want to get this developed around low cost MCU, such as STM8S003F3, PIC, Atmel, Renesas RL78/G11, We prefer using STM8S003F3 it’s low cost and easily available, rest all MCU’s are short in market no a days.

The Scope of work will be: Coding of MCU, Schematic, PCB Gerber File for Fabrication and Production.

Things to take care of: Minimal Components used, Low-cost Devices, PCB Size to be small, All components should be Through Holes, MCU to be SMD.

Electrónica Microcontrolador Diseño PCB Arduino Diseño de circuitos

Nº del proyecto: #26416319

Sobre el proyecto

52 propuestas Proyecto remoto Activo hace 3 años

52 freelancers están ofertando un promedio de ₹6387 por este trabajo

Adrianopl

Hello, I can develop a circuit based on PIC12F675 to perform the Sanitizer Dispenser that you need, please contact me so we can discuss the details of the project. Best regards,

₹12500 INR en 10 días
(7 comentarios)
6.0
avigupta0061

Best PCB Design Expert at your doorstep! Dear Client, I couldn’t stop myself from bidding after going through the description as they are an exact match with my skillset and experience. I have experience in Ethernet Más

₹25000 INR en 2 días
(24 comentarios)
6.2
CoherentTech123

Dear Sir, I am an expert with more than 20 years of experience in firmware development, programming and PCB Layouts. I have checked the details of your work. This can be realized with any 8-bit MCU Más

₹15000 INR en 10 días
(67 comentarios)
6.3
pankajauengg

Hello! I have already made this dispenser. Kindly come over chat and plan the project for the same. I had user arduino nano that cost 210inr. I have already prepared code for it.

₹7000 INR en 1 día
(49 comentarios)
5.8
alilakho8

hello dear, i am an Electronic Engineer with experience in embedded system designing and i have read your requirement and i can asure you it can be made in just one day.

₹2250 INR en 1 día
(12 comentarios)
5.1
sivom

Hi, I have the PIC micro controller board with relay, Ultrasonic sensor and IR sensor readily available and can start your work based on your requirement. you want custom PCB board to be developed? We can discuss.. Más

₹15000 INR en 30 días
(12 comentarios)
4.8
srbhfreelance

I can create the whole design for you. I can also help with manufacturing and component sourcing for Indian vendors itself. I am more interested in Licenced deal, where I get some kickback for every unit sold. Or I ca Más

₹1500 INR en 5 días
(4 comentarios)
4.0
kchakraborty

Hi, I can do what you exactly want. Just a few days back I have done a similar project related to design a system with minimal components to use ultrasonic sensor and RF modules. If you need I can send you images. I ca Más

₹15000 INR en 7 días
(9 comentarios)
4.2
Provi11

I have 3 years experience in Iot and embedded systems and have worked good hands on both hardware and software. I have worked on many projects that are as follows: Smart lock based on esp8266 Smart water management sys Más

₹1500 INR en 4 días
(5 comentarios)
3.6
danish2051

Hi We are team of experts having 6 plus years of experience in embedded systems, Iot, automation, pcb design and dovelopment and prototyping. I have hands on experience in arduino, esp32, pic, arm, raspberry pi and oth Más

₹11111 INR en 10 días
(16 comentarios)
4.0
maulik1717

Hi, I have just make pcb layout for one of my customer like same as your requirement ( Using TSOP 1838 IR Sensor,relays and micro controller sensor). So If you have circuit diagram, I am ready to design for you also. Más

₹7000 INR en 7 días
(2 comentarios)
3.6
etalhak

Hello, I am an electronics and telecommunication engineer and I am quite experienced with hardware design and embedded systems design. I have just designed a card like this but it uses only IR TX-RX pair. I can design Más

₹10000 INR en 7 días
(12 comentarios)
3.8
vishwas992

I have very good programming experience and worked on such kind of projects for my own need . please ping me for more discussion. I can develop lcd for you with minimal cost and provide you the links of Components .

₹7778 INR en 10 días
(1 comentario)
1.0
rs4517794

HI..I HAVE MORE THAN 7 YEARS EXPERINCED IN CIRCUIT DESIGN AND PROGRAMMING..IN MY PAST I HAVE DESIGN PROJECT WITH COMPANY..I HAVE ALREDY DESIGN SANITIZE CIRCUIT USING stm, TSOP ,UVC SENSOR AND TIMER UVC. I CAN DESIGN I Más

₹1500 INR en 2 días
(0 comentarios)
0.0
EngAssar

Hi I'm interested in your idea , i have an experience in many field that u need i have made many projects : * Automatic Grass Cutting Machine. * Industrial Robot Arm with Pneumatic System. * Automatic Filling Line. * Más

₹1500 INR en 2 días
(0 comentarios)
0.0
santhosh18199

We are team of electronics and electrical engineers(4 people) , having experience more than 3 years, and worked more in arduino, nextion, stepper control, Renesas, snack vending machine, coffe vending machine, c progra Más

₹3333 INR en 2 días
(0 comentarios)
0.0
ved1998

I have already made a automatic sanitizer using Arduino Uno/ Nano will like to try this project.

₹5556 INR en 5 días
(0 comentarios)
0.0
sufiansaeed143

Hi, I am offering my services on short notice, I am an Electronics Engineer, i will provide you complete schematic of the circuit and PCB layout as shown in the attachments, along with coding on low cost Micro controll Más

₹5065 INR en 5 días
(0 comentarios)
0.0
asifalilu

Dear Project Owner, I am happy to do this type of complete electronics design and development jobs. I have 10+ years of experience in this, and worked with startup companies successfully. My Top Skill includes, ✅Requi Más

₹6700 INR en 6 días
(0 comentarios)
0.0
msufyan9876

hi im mechatronics engineer i can make this circuit according tonur requirements and complete the circuit with programming

₹6667 INR en 3 días
(0 comentarios)
0.0