Pic18f ethernet bootloadertrabajos

I am looking for an experienced computer networking expert who can assist me in enhancing my understanding of network protocols, routing and switching, and network security. I am going to have an online at home test at 3pm EST(Eastern Standard Time) to 5pm on April 18th so I need just two hours of your time. The lecture notes and mater...5 (5.5.1, 5.5.2, 5.5.3, 5.5.4) - ICMP: The Internet control message protocol Section 5.6 >> The link layer and LANs: Chapter 6 - Introduction to link layer - Section 6.1 - Error detection and correction techniques Section 6.2. - Multiple access links and protocols Section 6.3. - Switched local area networks - Section 6.4 - Link Layer addressing and ARP 6.4.1 - Ethernet - section 6.4.2 - Link layer switches...

...developed app directly with hardware (beacons, sirens, etc.) - are solution-oriented (we don't believe in "that's impossible") - don't mind working on your own without constant supervision - keep your word and communicate openly Advantages: - experience with image processing, neural networks, and IoT concepts - knowledge of the Arduino IDE - basic understanding of communication protocols (USB, Ethernet, etc.) - project management skills - experience leading a development project - communicative English - you are ready to start right away You'll get a chance to: - directly influence the final product with your knowledge and skills - experiment and implement your ideas - continuously learn hands-on - collaborate with professional and senior develope...

...interacting with these accurately • Data and Document checking • Data Entry • Keep CRM tidy and accurate • Prepare and sort out paperwork ahead of events and distribute within the organization And more… Position Requirements • Experience in an admin role • Spelling accuracy • A good eye for fine details • A perfectionist • Passionate about being organized • A well-performing desk-based PC environment • Ethernet (LAN) connected Internet connection with 8x8 VoIP Test results attached that can be done in internet explorer at • A quiet, professional environment in which to work • Reliability • Dedication to a long-term career It is in your nature to analyse things and look for improvements • Willingne...

I need to create a driver for a telescope, a dome and a focuser, all these accessories are currently controlled by a programmable automation system, the idea is to make a driver for each section, which connects via Ethernet/IP for example and is capable of sending the orders from the PC using ASCOM.

...integrating Siyi cameras with the Herelink V1.1 system to enable live streaming. However, I've encountered persistent connectivity issues when attempting to connect via Ethernet cable. Despite my best efforts, I haven't been able to establish a stable connection. I'm seeking an expert who possesses a deep understanding of networking protocols, camera systems, and drone technology. Your task will be to troubleshoot the connectivity issue and devise a solution that ensures seamless live streaming from the Siyi cameras to the Herelink V1.1 system. Key Requirements: Proficiency in networking configurations, particularly with Ethernet connections. Experience with Siyi cameras and familiarity with their compatibility with external devices. In-depth knowledge of...

I'm looking for an experienced firmware developper to build an STM32 for a board based on STM32G0 MCU, The firmware shall manage interruption between button and sensors, enter into bootloader mode on an interruption on the serial port (RS232), the firmware shall manage a state machine based on sensors input and go to sleep mode when no interruption occurs. More details will be shared later

...dual boots Ubuntu 20.04 and Windows, I am currently experiencing issues with my Ethernet cables being detected only in the Ubuntu environment. I need top conect the Wi-Fi and an industrial Baumer camera. - So far, I've attempted to restart the system, check the network settings, and use USB adapters to connect the Ethernet cable, but these efforts have been unsuccessful. I am looking for a capable freelancer who can: - Diagnose and resolve the Ubuntu Ethernet detection issue within a month. - Provide clear instructions for future troubleshooting, should the problem arise again. Ideal candidates will: - Have substantial experience with Ubuntu 20.04 LTS. - Possess strong understanding of network drivers and Ethernet connections. - Show familiarity wit...

...Predator Helios 300 running Ubuntu. It's a laptop with 2 partitions with Ubunto on 1 of them, In the Ubuntu partition, it seems unable to detect the Ethernet ports I use for my industrial cameras, as well as the Wi-Fi connection. However, in the other partition with windows, Wifi conexion seems to work eventhought we ar . The issue might be related to drivers or ports configuration, but I am not certain of this. Here's what I need: - Diagnosis of the issue: why can't my Ubuntu partition detect these connections? - Installation and configuration of any necessary drivers, if it is found that there's a deficiency in this area. - Ensure that both Ethernet ports and Wi-Fi connection are working properly on my Acer Predator Helios 300. Skills & experie...

*** Access to the Mikrotik will not be available. I can provide the default config file. I am looking for someone to give me a config file that I can drop into the mikrotik and configure the unit. *** I need assistance in configuring specific features on my Mikrotik Chateau LTE6-US device. Specifically: - Configure a dual WAN with Ethernet/T-Mobile LTE ether1/lte1 - Establish two specific VLANs * VLAN 100 at ether2/3 * VLAN 200 at ether4/5 Additional requirements include: - default Firewall configuration vlan 100 can talk to vlan 100 or 200 or the internet vlan 200 can only talk to the internet - VPN setup connect to a wireguard vpn server and route all traffic through the wireguard tunnel. port forwarding would allow traffic from the wireguard server to the

Por favor, regístrate o inicia sesión para ver los detalles.

I'm looking for a skilled professional to assist with an embedded software project that involves working with microcontrollers. Requirements: RTU shall be connected to following ETHERNET TCP IP/ MODBUS TCP IP/ SERIAL/ DNP3.0 SERIAL/ DNP 3.0 IP, etc. The ports Profibus and Profinet used protocol converter RTU connections GPRS link over DNP3 /Mod Bus TCP/IP /GSM GPRS servers. The RTU having functionalities analog input, analog output, digital input, digital output. RTU communication protocol: DNP3 level 4 & MQTT Both RTU Serial Comm Protocol: DNP3 level 4 Master/slave and peer-to-peer, Slave, Modbus Master/Slave DNP3 level 4 in TCP Master/Slave, UDP Master/Slave and peer-to-peer, Modbus TCP Server/Client, Modbus RTU in TCP Client.

ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

I'm in need of a highly expert system developer for a SCADA Platform. The emphasis is on real-time monitoring and alarm management. The SCADA system should be proficient with sensor connectivity, though the protoc...SCADA Platform. The emphasis is on real-time monitoring and alarm management. The SCADA system should be proficient with sensor connectivity, though the protocol requirement is flexible. Ideal Skills and Experience: - Deep understanding of SCADA systems. - Experience with real-time monitoring and alarm management. - Ability to integrate SCADA with various sensors. - Protocol knowledge in Modbus, Ethernet/IP, and OPC-UA is a plus, though not mandatory. Your key responsibility will be to ensure the system works seamlessly and efficiently, so strong attention to de...

I am looking for an experienced developer who is adept at handling Arduino IDE. The primary task is to create a custom web server for an ESP32 board. The server should have the following features: -Should communicate with android, ios, Linux, windows device through web browser and different resolutions. -Should be able to create its own access point, but also connect to internet though ethernet or Wi-Fi. -Integration with Tuya Application: Seamless integration with the Tuya application is a must. -Should be an easy set, simple, plug and play webserver -Board: ESP32 Kincony E16P, 16 relays, 16 digital inputs, 4 analog inputs Ideal candidates should be experienced in ESP32 board manipulation, Arduino IDE, and comfortable working with basic authentication security measures. Prev...

...wait some seconds, remove the card and go on to the next system. Your task: Create a Raspberry Pi OS Lite image wich runs the following tasks: The complete flow must run at startup and must only require one key stroke by the user. At boot time of the OS 1. Automatically log in with root access (because of step 7) 2. Read the CPU ID from the board 3. Read the mac address from the onboard ethernet 4. Call an API: https://[host]/api/va/pool/[cpu id]/[MAC address] 5. Print the server response on the screen 6. Write 'place this device in the pool after you shut down the system by pressing ENTER' 7. Shut down the board You are free to use bash, python or golang. The following is immanent, but just to mention: - the OS must use DHCP to get an IP address and DNS...

...our servers with their internal 2G/3G modems for mobile Internet connection. 3G is being phased out in Europe, 2G is not. But 2G (more precisely GPRS) is sometimes not fast enough and its bandwidth is even lower in crowded cities. Therefore, we need to change the backhaul connection of our gateways to 4G mobile Internet. There are two approaches to this: 1) using an external 4G modem that has an Ethernet connection (), 2) connect a 4G USB stick to the USB connector of the Kerlink Wirnet Station, like the Huawei K5150 (), or the Huawei K5160 (). As we also have some of the aforementioned 4G USB modems

ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

I'm seeking an expert in PIC microcontroller to assist in converting an existing embedded project. The primary goal of this conversion is to replicate the functionality of an existing project on a sister PIC chip. The original project was to create an Ethernet to Serial functionality on the Microchip Ethernet Starter Kit. This functionality was achieved. Now the objective is to move that project to a physically smaller PIC chip of the same family. A new custom daughterboard has been built. Some programmers are thinking to start over with the new chip. I believe this is an uncertain way forward. My request is to convert the existing project rather than start over. I am open to your suggestions. It's essential that interested freelancers have a strong backg...

I'm seeking a qualified freelancer with proficiency in Raspberry Pi and Raspbian operating systems to assist with configuring my network. Key Points: - two Raspberry Pi are connected together with an Ethernet cable (local network). - one of the Raspberry Pi is also a WIFI AP - connection to AP should be possible from a smartphone using WiFi connection, possibility of multiple clients - Everything in the same network (smartphone should also communicate with the Raspberry PI that is not configured as AP - step-by-step instructions needed for implementation Ideal Candidate: - Hands-on experience with Raspberry Pi - In-depth knowledge of Raspbian operating system - Able to present detailed project proposals reflecting a clear understanding of this project's requirements...

ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

I am in need of a professional who can create a bootable image using the most suitable version of Fedora. The image should incorporate a hypervisor and effectively initiate a Windows 10 virtual machine on a laptop with 4GB of RAM. In addition to this, I require the incorporation of a virtual switch and bridge so that any VM present can access the Internet through the wireless card or Ethernet port. The choice of the hypervisor should be guided by industry standards and the latest technologies. While I have listed KVM, VMware, and VirtualBox, I am open to alternatives as well should they prove to be a stronger match for my needs. Skills and Experience Required: • Creating bootable images • Working with Fedora and Windows 10 operating systems • Understanding of hype...

...clients receiver ... it can be DVB-T2 as own network.. using a special hardware by the manufacturer.... they will tell us later how they want that MPEG-TS... - but we have even CHEAP dvb-C encoders oder modulators for local CABLE-TV operators... like we have manufacturers being able to manufacture/produce affordable 19" rackmount-kits for even less than 150,- US-dollars ... like having 2x 10GE input ETHERNET and having RF-UHF-out for being connected to cableTV distribution system... or even to SATELLITE upstream transmitters... - I mean we have C-BAND capacity all over the world... on MANY SATELLITES ... as FULL TRANSPONDERs... so we can deliver using big 13meter dishes to their satellites all over the planet... in C-BAND as well as Ku-BAND to other systems... so we can dist...

I need a bootloader for the STM32H750B-DK development board. The bootloader must be written with STM32CubeIDE and must contain the .IOC file When the board is turned on, if there is a valid application in the board's QSPI memory (dual bank), it starts it If there is no valid application or if the "user" key is pressed, the bootloader must allow the loading of a new firmware (.xip file) from the PC to the QSPI memory (dual bank) via USB CDC Once the file has been uploaded, you must launch the application It is sufficient that we establish a serial communication protocol, I will take care of creating the PC software for choosing and sending the .xip file to be sent to the board.

I'm seeking an experienced network and security professional who can assist with the design and configuration of a network in a Small Office/Home Office (SOHO) environment. The wor...network that meets the specific needs of a SOHO. - Configuring a robust firewall to ensure the network's security. - Establishing an effective intrusion detection system. Ideal candidates will have a solid understanding and experience of: - Network design in a SOHO environment. - Firewall configuration. - Intrusion detection systems. Preference will be given to professionals with experience using Ethernet (IEEE 802.3). The ability to deliver a secure, efficient and robust network infrastructure is the ultimate goal. If you have the skills and experience, I'd love to hear how you can co...

I need experienced Linux System Network Engineer to configure the networking features of my Almalinux server. The work primarily involves: - NIC Configuration: The server uses an Ethernet Network Interface Card (NIC). I require assistance to properly configure this Ethernet NIC. - Ethernet Configurations: The foremost Ethernet setting I want to implement is the static IP setup. Therefore, a profound understanding of IP addressing and subnetting is essential. In addition to Linux system administration, your skills and experience should ideally include Almalinux, NIC settings configuration and IP addressing. This should be a straightforward assignment for those familiar with networking on Linux servers. Please only bid if you have prior experience in the abo...

Enable USB debugging mode and authorization by default. Set the device to automatically power on and boot when electricity is connected. Remove the initial setup wizard after the first installation is complete. Enable TCP/I...device to automatically power on and boot when electricity is connected. Remove the initial setup wizard after the first installation is complete. Enable TCP/IP functionality by default, using port 5555. Delete all unnecessary software applications. Install default APKs (customizable options available). Modify the default boot animation and wallpaper images. Emulate a WiFi signal using an Ethernet connection. Enable root access on the device. Manage guest user accounts through ADB or API methods, including adding, deleting, modifying, and querying (e...

ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

Por favor, regístrate o inicia sesión para ver los detalles.

I’m looking for someone to help do the heavy lifting on a project. I need a Arduino (esp32?) Wi-Fi preferably but Ethernet is fine too. can handle 50 input buttons. Each of those 50 would then send out an OSC commands. I can do the physical work of assembly, install , basic configuration.

ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

1. ESP32 MCU code that will handle file transfer and the print job operations on Thermal Printer. The MCU will receive pdf over WiFi and send to AI engine. 1.1 MCU will connect to printer over serial/USB port. 1.2 MCU will send data to API server through Ethernet. 1.3 MCU will store files in SD card. 1.4 MCU will process only one request at a time. 1.5 MCU will support only one thermal printer as jointly agreed. 2. AI Engine to detect shipping label from pdf file. 3. AI engine server log to show file transfer and debug as well as error logs like below ----------- 12/03/2024 19:00 Debug - file received from MAC address AA:BB 12/03/2024 19:00 Debug - successfully extracted and saved 12/03/2024 19:00 Debug - shipping label sent to MAC

I'm in need of a skilled MikroTik engineer to assist in managing a network setup already in design phase. The tasks include: - Configuring routers, switches and access points. - Troubleshooting and resolving any network issues. Specifically, we have a switched ethernet lab and it is 90% setup but we need support on a few configurations. The ideal candidate should be adept in MikroTik equipment, with extensive experience in configuring such devices and network trouble-shooting. A strong track record in implementing and managing network setups is highly valued.

...need to develop a module project using Rockchip's RV1126. The SOM module must include: 1GB or 2GB DDR4 RAM, Power supply chip, EMMC, Processor. All I/Os should be accessible through a connector, which will be attached to the test board. The test board should have: Connections for 2 cameras, preferably compatible with camera modules used in ESP32 and Raspberry Pi, with 2 MIPI CSI camera inputs, Ethernet connection, Wifi connection via SDIO, Audio (microphone input), Audio (speaker output, PAM8403), 1 MIPI DSI display, 1 RGB Display connector. Adding to the previous specifications, the project must be delivered using Altium software. Payment will be split into stages, corresponding to the following phases of development: schematic, PCB, and, after manufacturing, testing of t...

I need an experienced IoT professional who's skilled in developing IoT applications, configuring SNMP protocols, and programming with Micropython. Your main tasks will entail: - Developing an IoT system employing sensors. - Programming temperature, motion, and light sensors. - Integrating SNMP protocols alongside WiFi, Bluetooth, and Ethernet communication channels. Consistent experience in the IoT space along with an extensive understanding of Micropython is quintessential. Understanding of SNMP protocols and varying communication channels is highly regarded. Please indicate your relevant experience in your proposal.

...AIS, to be decided). The idea is starting from a existing CM4 carrier board ‘open source’, and modify it to add/remove elements, also ‘open source’. Most of the requirements can be found in any CM4 carrier board available with a public license. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm • Power souce 12v • USB-C • Ethernet • CANBUS (Can provide design sources) • PCIe • SD card slot • LVDS signal + backlight (Can provide design sources) • Marine AIS class B (Can provide design sources) • Other UART inputs with optocouplers (to be decided) • GPS (Can provide design sources) • GPIO ports ac...

...EXECUTED IMMEDIATELY (ANYDESK) AND COMPLETED WITH IN 1-2 HOURS OF ACCESS TIME. Anydesk will be to configure the ethernet cards to the hyper-v switch manager to add these to the CHR and then access can be granted directly via winbox to the mkt CHR TASKS 1) "Basic" instalation and configuration of CHR (cloud hosted router) on my pc running on hyper-v vm using my 4 port NIC 2.5GbE. "Basic" = internet gateway + dhcp server. 2) Bypass ISP blocked port 80 and 443 using Mikrotik CHR on a hyper-v VM For port 80,443 bypass we would prefer to use cloudflare tunnel The configuration will be like the diagram: the ISM modem (1) will connect to a 4 port ethernet NIC on my pc running CHR and from there it will connect to my current Mikrotik to connect to th...

...all GB ) configuration to a CHR (cloud hosted router) on my pc running on hyperv vm using my 2.5GbE 4 port NIC so I can have increased speed on my router. 2nd task is optional. 2) Bypass ISP blocked port 80 and 443 using Mikrotik CHR on a hyper-v VM For port 80,443 bypass we would prefer to use cloudflare The configuration will be like the diagram: the ISM modem (1) will connect to a 4 port ethernet NIC on my pc running CHR and from there it will connect to my current Mikrotik to connect to the other devices on my network. I can't disable DHCP on the ISP Modem, so the CHR will get the public ip form the ISP modem but will use its own DHCP server as it is currently configured on the RB4011. - Import settings from RB4011Igs+ to CHR (VM already created) - create 60 day ...

...1) I need to transfer my current Mikrotik RB4011Igs+ (ports are all GB ) configuration to a CHR (cloud hosted router) on my pc running on hyperv vm using my 4 port NIC 2.5GbE. 2) Bypass ISP blocked port 80 and 443 using Mikrotik CHR on a hyper-v VM For port 80,443 bypass we would prefer to use cloudflare The configuration will be like the diagram: the ISM modem (1) will connect to a 4 port ethernet NIC on my pc running CHR and from there it will connect to my current Mikrotik to connect to the other devices on my network. I can't disable DHCP on the ISP Modem, so the CHR will get the public ip form the ISP modem but will use its own DHCP server as it is currently configured on the RB4011. - Import settings from RB4011Igs+ to CHR (VM already created) - create 60 day te...

...TIME. 1) I need to transfer my current Mikrotik RB4011Igs+ (ports are all GB ) configuration to a CHR (cloud hosted router) on my pc running on hyperv vm using my 4 port NIC 2.5GbE. 2) Bypass ISP blocked port 80 and 443 using Mikrotik CHR on a hyper-v VM For port 80,443 bypass we want to use cloudflare The configuration will be like the diagram: the ISM modem (1) will connect to a 4 port ethernet NIC on my pc running CHR and from there it will connect to my current Mikrotik to connect to the other devices on my network. I can't disable DHCP on the Modem, so the CHR will get the ip form the ISP modem but will use its own DHCP server as it is currently configured on the RB4011. - Import settings from RB4011Igs+ to CHR (VM already created) - create 60 day test license ...

...capable of configuring a NetApp 6600 storage system to effectively manage data storage. Specifically, the task involves: Netapp storage not providing any software interface for making raid configuration and not allowing for a software download from its official web site - connecting to the device throw the netapp software and configuring a raid 5 - i will provide a pc connected to the controller ethernet port with anydesk remote access - very important note I faild to find any proper software or a web interface for connecting to that device - previous experience with such a case is a must . The successful bidder must have demonstrated experience with netapp storage configuration and must have a software for connecting to the device that he used before in a similar one an...

I am seeking a skilled 3D designer to create a detailed design for a small network cable holder capable of accommodating 8-12 ethernet ports. The holder design should also include two din rail clips at the end for enhanced functionality and support. Key requirements are: - The 3D model should be designed to hold ethernet cables. - The design should accommodate 8-12 ports, qualifying it as a 'small' network cable holder. - Dual DIN rail clips need to be incorporated at the ends of the holder. - The design must be compatible with plastic production methods. The ideal candidate would have proven experience in 3D design for hardware and a thorough understanding of plastic product design. Familiarity with network infrastructure equipment would be a plus. Please inclu...

...writing clean, efficient, and maintainable PHP code. 3. Communication with MikroTik OS via API: Experience in communicating with MikroTik OS through its API is crucial. The developer should understand how to establish communication channels, send requests, and receive responses using the API. 4. Understanding of PPPoE Protocol: A solid understanding of how PPPoE (Point-to-Point Protocol over Ethernet) works is required. The developer should be familiar with its implementation, configuration, and operation within network environments. Deliverables: 1. Development of a custom third-party module for UISP. 2. Integration of the module with PHP for seamless operation. 3. Implementation of communication functionalities with MikroTik OS through its API. 4. Documentation covering ins...

STM32 ETHERNET TO RS485 CONVERTER BOX We want to work with a person living in Turkey.

I'm looking for a seasoned programmer who can develop a program that will channel specific PC applications to either a WiFi or Ethernet connection, based on requirements. This targeting will be applied to three types of applications, developed using different coding languages: Python, Java, and C#. Key Requirements: - Development of a program that can efficiently set WiFi or Ethernet connection for specific applications on a Windows system. - The program should be able to target applications written in Python, Java, and C#. - The system must be user-friendly and offer simple ways to switch between WiFi and Ethernet connections for each individual application. - Conduct testing to ensure the program operates effectively under different scenarios. - Address any bu...

We want Embedded professionals having more than 5 years experience in embedded software and hardware development,  Should have sound knowledge of communication protocol like Rs232,RS485,SPI,I2C,USB & Ethernet and having experience in integration of various hardware system available in our organization and these hardware have RS232 and USB ports and the requirement is to capture the data from these ports and parsed the required data and then store it on the given server. The user must be expert in fetching data from the mentioned ports and ability to develop mobile app for this particular activity will be an added advantage.  Key Project Elements: - The fetching of data from the RS232 and USB ports and store it on the server. - Additional communication modules may be ...

...interfacing with clients, and navigating change and risks. It Would Be An Asset If You Also Have: • Expertise in Network Architecture and communications protocols. • Acquaintance with Diagnostic tools, specifically CANalyzer, used for system/component integration. • Proficiency with Engineering Quality Tools, notably Failure Mode Avoidance (FMEA). • Experience with electrical protocols such as CAN bus, Ethernet, and a background in PCB. • An academic background in Electrical and Electronic Engineering, Systems Engineering, or Computer Science, or an equivalent blend of qualification and experience. Skills To Excel In This Role: • Profound knowledge of Electrical/Electronic systems down to the component intricacies. • Proven proficiency in system...